This offer does NOT include a plastic kit! Set of 140 pcs CNC Walnut blocks, brass photo-etched hooks and eyelets and professional ropes for hoist of guns of model HMS Victory by Heller; 1:100. Want to be sure that your model is as close as possible to a realistic appearance? Be sure that your model is equipped with facilities corresponding to reality? Equip your model with accessories from our own production and from selected high-quality suppliers. For your model you can choose professional. This all according to relevant historical facts! With our accessory you build the best model. Set of recommended CNC wooden blocks, brass photo-etched hooks and eyelets and professional ropes for hoist of guns of HMS Victory model by Heller, 1:100. 22 visible guns o. Each gun have three hoist – two on the. Sides of gun barrels (to move gun to firing position), next one hoist in the back of gun (to move for charging position). This set contains these parts. Each hoist is made by SB1/3+2DB/3 walnut blocks. WaB-SB1/2.5 – 322= 66/70pcs. WaB-DB2/2.5 – 322= 66/70pcs. 20m rope for gun’s hoists 0.25 mm in diameter. R-N75/20 – 20 m. Breeching rope 0.75 mm. Rope threader – 2x. For each gun you need 8 eyelets and 6 hooks based on tackles. 5x LO1,5B – each contains 50 pcs of eyelets with diameter 1.5 mm/w. 0.3 mm – black patination. 1x LH3B – contain72 pcs of boat hooks with length 3 mm/w. You can find recommended description of use on my pages/Workflow. For HMS Victory 1:100 model I also offer these excellent accessories. Complete set of 104 brass gun barrels. Set of CNC walnut wooden blocks for rigging. Set of ropes for rigging. Set of flags and draft scales. Set of nelson’s signal flags. Set of gun’s carriages for guns and carronades. Set of photo-etched parts for rigging and other parts.