https://modelkitsships.name Tue, 30 Jun 2026 18:34:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://modelkitsships.name/2021/11/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare-2/ https://modelkitsships.name/2021/11/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare-2/#comments Sat, 06 Nov 2021 09:22:41 +0000 http://modelkitsships.name/2021/11/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare-2/






International Buyers – Please Note. The item “SAITO Steam engine 25cc for model ship marine boat T2GR & B2G boiler Set Rare” is in sale since Friday, July 16, 2021. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Body Parts & Interior\Boats & Watercraft”. The seller is “japanjack_85″ and is located in Kanagawa. This item can be shipped worldwide.

• Country/Region of Manufacture: Japan
• Compatible Fuel Type: Engine
• Compatible Brand: For Saito
• Type: Steam engine
• Color: Gold
• MPN: T2GR
• Compatible Vehicle Type: Steamship
• Age Level: 12-16 Years
• Brand: Saito

]]> https://modelkitsships.name/2021/11/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare-2/feed/ 0 https://modelkitsships.name/2021/09/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat-2/ https://modelkitsships.name/2021/09/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat-2/#comments Tue, 07 Sep 2021 07:06:08 +0000 http://modelkitsships.name/2021/09/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat-2/






Model : T1DR-L / BT-1 set. Size : Height 120mm / Length 190mm x Width 75mm. Burning Time : 15 mins. Size : Height 128mm / Length 86mm x Width 66mm. Stroke volume: 4.5cc. Valve type : D type / Slide valve. Fit Model : BT-1L (Boiler). This item is for model kit. Please do not remodeling. 5 to 10 days. It may take bit longer, to UK, France, Germany. Thank you for reading. The item “New SAITO Steam Engine T1DR-L Steam Boiler BT-1L set Model Ship Toy Marine Boat” is in sale since Monday, August 24, 2020. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “jp-distribution” and is located in Japan. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Mexico, Brazil, Canada, Australia.

• Country/Region of Manufacture: Japan
• Gender: Boys
• MPN: T1DR-L / BT1-L
• Character Family: Engine for Model Ship / Marine
• Brand: SAITO

]]> https://modelkitsships.name/2021/09/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat-2/feed/ 0 https://modelkitsships.name/2021/02/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare/ https://modelkitsships.name/2021/02/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare/#comments Sat, 20 Feb 2021 22:32:25 +0000 http://modelkitsships.name/2021/02/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare/









International Buyers – Please Note. The item “SAITO Steam engine 25cc for model ship marine boat T2GR & B2G boiler Set Rare” is in sale since Thursday, November 19, 2020. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Body Parts & Interior\Boats & Watercraft”. The seller is “japanjack_85″ and is located in Kawasaki. This item can be shipped worldwide.

• Country/Region of Manufacture: Japan
• Compatible Fuel Type: Engine
• Compatible Brand: For Saito
• Type: Steam engine
• Color: Gold
• MPN: T2GR
• Compatible Vehicle Type: Steamship
• Age Level: 12-16 Years
• Brand: Saito

]]> https://modelkitsships.name/2021/02/saito-steam-engine-25cc-for-model-ship-marine-boat-t2gr-b2g-boiler-set-rare/feed/ 0 https://modelkitsships.name/2020/09/old-large-stuart-boat-marine-ship-steam-engine-boiler-gauge-live-steam-wood/ https://modelkitsships.name/2020/09/old-large-stuart-boat-marine-ship-steam-engine-boiler-gauge-live-steam-wood/#comments Sat, 19 Sep 2020 21:10:19 +0000 http://modelkitsships.name/2020/09/old-large-stuart-boat-marine-ship-steam-engine-boiler-gauge-live-steam-wood/













WE HAVE A LARGE HORIZONTAL COPPER STEAM BOILER TANK FOR SALE. IT HAS WOOD TRIM ON THE COPPER TANK. The item “Old Large Stuart Boat Marine Ship Steam Engine Boiler Gauge Live Steam wood” is in sale since Tuesday, August 25, 2020. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “depot” and is located in Parker, Colorado. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Stuart

]]> https://modelkitsships.name/2020/09/old-large-stuart-boat-marine-ship-steam-engine-boiler-gauge-live-steam-wood/feed/ 0 https://modelkitsships.name/2019/11/stuart-walking-beam-steam-engine-boiler-accessories-free-shipping/ https://modelkitsships.name/2019/11/stuart-walking-beam-steam-engine-boiler-accessories-free-shipping/#comments Sat, 23 Nov 2019 21:14:05 +0000 http://modelkitsships.name/2019/11/stuart-walking-beam-steam-engine-boiler-accessories-free-shipping/













I bought this Stuart Turner kit in January 1977. It is precision built and was lots of fun to do it and see it run on steam. I recently got it all cleaned up again and we ran it on steam with the boiler. The boiler pops off the safety valve at about 40 PSI. We ran it on air as well to get some oil back into the working parts before it ships out. I enjoy this engine but now it’s time for it to move on down the road. I decided to just clean it up and leave it in the Vintage look. It does have some chips in the paint etc. As seen in the pictures. The new owner can paint it another color if they like. The engine sitting on the aluminum plate base is a total of 14 x 6 x 12 inches tall and weighs 18 pounds. The engine bore is 1 inch and stroke is 2 inches. The engine has carefully been adjusted and tested. It runs slow on 20 PSI and looks good. It will run fast even up to 40 PSI or more. Take a careful look at all the pictures and the foggy one is it running on 40 PSI live steam. The boiler is shown blowing off the pre set 40 # safety ball valve. You will need a MAPP gas bottle of the type used for hand held propane or MAPP gas torches. Will run on propane too but slow to heat up. If you run it on an air compressor you will just need to hook the hose up. The fitting now on the hose is one of the most popular ones but easy to change. Also note all the items in the large picture. All of those books, papers, blueprints, and things are included. You may choose to do that as it is a very good price considering all that is in the box. ————————- Now on to the BOILER DESCRIPTION. I scratch built the boiler from a piece of 4 in. Pipe by 7 inches long with 1/4 inch plate welded on both ends. One of the pictures shows the boiler with the fire box door open. In there is a one burner unit like a propane camp stove burner. It burns best with a MAPP gas fuel bottle. You add water by unscrewing the brass cap and remove the ball check valve and spring. Add water and replace ball, spring and cap. The damper in the 1 1/4 inch smoke stack will adjust to keep the most heat in the boiler. There is a 3/4 inch diameter pressure gauge on the boiler that is quite accurate. An accessory is the screw in pipe with large gauge and air hose connector and ball valve. That is to check the blow off valve pressure with air, and handy to blow the water out of the boiler when you are done to help prevent rust. It is shown in the picture blowing off at 40 PSI with steam. The copper tube has fittings on the end to fit the boiler and the engine. The rubber hose has fittings needed to run on air. There are two “tri-cocks” that can be opened and closed to see if water or steam comes out to let you know there is still water in the boiler. I look at my auctions every day and will get back ASAP. The item “STUART WALKING BEAM STEAM ENGINE + BOILER & ACCESSORIES FREE SHIPPING” is in sale since Friday, November 22, 2019. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “grandadio” and is located in Hope Mills, North Carolina. This item can be shipped to United States.

• Country/Region of Manufacture: United Kingdom
• Year: 1977
• Features: ready to run right out of the box.
• MPN: purchased in 1977
• Character Family: model live steam engine
• Age Level: 17 Years & Up
• Brand: Stuart Walking beam steam engine

]]> https://modelkitsships.name/2019/11/stuart-walking-beam-steam-engine-boiler-accessories-free-shipping/feed/ 0 https://modelkitsships.name/2018/01/the-v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/ https://modelkitsships.name/2018/01/the-v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/#comments Sat, 20 Jan 2018 15:49:31 +0000 http://modelkitsships.name/2018/01/the-v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/









Overall dimensions: (mm) Bore : 14mm Stroke : 16mm Each cylinder Capacity: 3ml Planetary Gear ratio: 4:1 Flywheel diameter : 37mm Output shaft : 5.5mm Other Output shaft :4.5mm O. Height : 90mm Net weight : 930G Note: This is a completely assembled engine. Made for the engine from the flywheel counterclockwise rotation. (Not inverted) The middle is the control valve, Intake pipe size 3MM, with a lubrication pot, a remotely mounted servo with rod can be used to activate the valve lever through 90 degrees. Steam boiler feed pump: copper and stainless steel, long 55MM, width 30mm, high 42mm, bore 6MM, piston stroke 5MM, eccentric 15MM, shaft hole 4mm, Side of the hole thread: M3 with the top wire Specifications. The item “The V4-cylinder steam engine (with Steam boiler feed pump) Free Shipping” is in sale since Sunday, December 08, 2013. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “galglg” and is located in Guangdong Foshan. This item can be shipped worldwide.

• Brand: Microcosm
• MPN: Does Not Apply

]]> https://modelkitsships.name/2018/01/the-v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/feed/ 0 https://modelkitsships.name/2018/01/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat/ https://modelkitsships.name/2018/01/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat/#comments Sun, 14 Jan 2018 03:24:29 +0000 http://modelkitsships.name/2018/01/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat/






Model : T1DR-L / BT-1 set. Size : Height 120mm / Length 190mm x Width 75mm. Burning Time : 15 mins. Size : Height 128mm / Length 86mm x Width 66mm. Stroke volume: 4.5cc. Valve type : D type / Slide valve. Fit Model : BT-1L (Boiler). This item is for model kit. Please do not remodeling. 5 to 10 days. It may take bit longer, to UK, France, Germany. Thank you for reading. The item “New SAITO Steam Engine T1DR-L Steam Boiler BT-1L set Model Ship Toy Marine Boat” is in sale since Wednesday, June 22, 2016. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “jp-distribution” and is located in Japan. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Brazil, Australia.

• Brand: SAITO
• Character Family: Engine for Model Ship / Marine
• MPN: T1DR-L / BT1-L
• Gender: Boys
• Country/Region of Manufacture: Japan

]]> https://modelkitsships.name/2018/01/new-saito-steam-engine-t1dr-l-steam-boiler-bt-1l-set-model-ship-toy-marine-boat/feed/ 0 https://modelkitsships.name/2016/04/v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/ https://modelkitsships.name/2016/04/v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/#comments Sun, 03 Apr 2016 00:24:11 +0000 http://modelkitsships.name/2016/04/v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/










Overall dimensions: (mm) Bore : 14mm Stroke : 16mm Each cylinder Capacity: 3ml Planetary Gear ratio: 4:1 Flywheel diameter : 37mm Output shaft : 5.5mm Other Output shaft :4.5mm O. Height : 90mm Net weight : 930G Note: This is a completely assembled engine. Made for the engine from the flywheel counterclockwise rotation. (Not inverted) The middle is the control valve, Intake pipe size 3MM, with a lubrication pot, a remotely mounted servo with rod can be used to activate the valve lever through 90 degrees. Steam boiler feed pump: copper and stainless steel, long 55MM, width 30mm, high 42mm, bore 6MM, piston stroke 5MM, eccentric 15MM, shaft hole 4mm, Side of the hole thread: M3 with the top wire Specifications. United States / United Kingdom. Brazil / South America. May take up to 5-7 weeks due to strict Custom Inspection. Italy / Canada / France / Spain / Germany/ Eastern Europe. May take up to 4-7 weeks due to strict Custom Inspection. Return items should include the original packaging and accessories. Customer Service : We have always been trying to provide the best service and reliable products for every customer. The item “V4-cylinder steam engine (with Steam boiler feed pump) Free Shipping” is in sale since Thursday, August 22, 2013. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “galglg” and is located in Foshan, Guangdong. This item can be shipped worldwide.

• Brand: Microcosm
• MPN: Does Not Apply

]]> https://modelkitsships.name/2016/04/v4-cylinder-steam-engine-with-steam-boiler-feed-pump-free-shipping/feed/ 0